Help centre

Help & FAQs

Everything you need to run smooth, on-time matches with CueTime — from your first shot clock to casting a full match onto the big screen.

Getting started

CueTime is ready to use as soon as you open it. To set it up for your league or competition:

  1. Tap the Settings (cog) icon in the top bar.
  2. Got a preset for your league? Tap Load Preset and pick it from My Presets or the Community tab — you’re done.
  3. Otherwise, choose which clocks you need. Set Match and Frame to Clock, Timer or Off, and switch the Shot Clock on or off.
  4. Set the durations. Common shot times are 30, 45 or 60 seconds.
  5. Add warnings and final-seconds beeps, and tap the ▶ button next to any setting to preview how it sounds.
  6. Tap Save Preset so you can load the same setup again next time.

Settings are saved automatically. Use Reset all settings at the bottom of the Settings screen to go back to the defaults.

The match screen

The match screen shows the clocks you’ve enabled: the Match and Frame clocks at the top and the large Shot clock below. If scoring is on, the scoreboard sits above them.

Match screen with scoreboard, match clock, frame clock and shot clock
Match screen ready to start in light mode
The match screen in dark and light mode.
ActionWhat it does
Shot clock ▶ (play)Starts the shot clock. If the match and frame clocks aren’t running yet, they start too.
Tap the shot clockRestarts the shot clock from the full shot time, ready for the next shot.
Press and hold the shot clockStops the clock while you hold it. Release to restart the countdown — ideal while the balls are still moving.
Shot clock ■ (stop)Stops and resets the shot clock without starting it again.
Home Ext. / Away Ext.Adds a time extension to the current shot for that player or team. CueTime keeps track of how many each side has left this frame.
Frame ▶ / ❚❚Starts or pauses the frame clock. Pausing the frame also pauses the shot clock.
Frame ■ (End Frame)Ends the current frame: resets the frame and shot clocks and refreshes time extensions. The match clock keeps running.
Match ▶ / ❚❚Starts or pauses the match clock. Pausing the match pauses the frame and shot clocks too — perfect for stoppages.
Match ■ (End Match)Asks you to confirm, then ends the match and resets every clock.
Tap the score boxOpens the scoreboard so you can update or reset the frame score.

Timers explained

CueTime has three independent timers. Use any combination to suit your rules.

  • Shot clock — counts down each shot. Restart it after every shot with a single tap.
  • Frame clock — counts down a time limit for each frame, or counts up to show how long the current frame has taken.
  • Match clock — counts down the overall match time limit, or counts up to show how long the match has been running.

Match and frame modes

ModeBehaviour
ClockCounts down from the time limit you set, with optional warnings and beeps as time runs out.
TimerCounts up from zero to show elapsed time, with no time limit.
OffHides the clock from the match screen completely.

Example setups

  • Shot clock only — Shot Clock on, Match and Frame set to Off.
  • Match and shot — Match set to Clock (e.g. 45 minutes), Frame set to Off or Timer, Shot Clock on.
  • Match clock only — Match set to Clock, Frame set to Off, Shot Clock off.
  • Full timing — Match and Frame set to Clock with the Shot Clock on, for tightly scheduled tournaments.

Warnings, beeps & voice alerts

Each clock has its own alerts so everyone knows when time is running out.

  • Warn at (seconds remaining) — plays a warning at a set point, for example at 15 seconds on a 30 second shot clock, or 60 seconds before the end of a frame.
  • Beeps from (seconds remaining) — beeps every second for the final seconds, like a professional shot clock. Set it to 0 for no beeps.
  • Voice — choose the voice used for spoken announcements such as “Frame has 1 minute remaining”.
  • Visual alerts — the clocks change colour as deadlines approach, so players can see time running out as well as hear it.

Every setting has a ▶ preview button, so you can hear exactly what players will hear before the match starts.

Shot clock options

First shot after the break

Give the first shot of each frame its own time — for example 60 seconds after the break, then 30 seconds for every shot after that. Set it to 0 to use the normal shot time.

This only applies to the first shot of a frame, so the Frame clock must be set to Clock or Timer — CueTime uses it to know when a new frame starts.

Time extensions

Turn on Time Extension to give each player or team extra time when they need it.

  • Seconds to add — how much time each extension adds to the current shot.
  • Uses per frame — how many extensions each side gets. They’re refreshed at the start of every frame.

During a match, tap Home Ext. or Away Ext. next to the shot clock to use one.

Automatic shot clock reduction

Speed up play towards the end of a match or frame by reducing the shot time automatically. CueTime announces the change when it happens.

  • Match Shot Clock reduction — for example, use 30 seconds for most of the match, then 15 seconds for the last 15 minutes. Requires the Match clock to be set to Clock.
  • Frame Shot Clock reduction — the same idea within each frame, for example dropping to 15 seconds when 5 minutes of the frame remain. Requires the Frame clock to be set to Clock.

Scoreboard

Turn on Scoring in Settings to show the frame score above the clocks. Enter a Home team name and Away team name — or player names — to personalise it.

During the match, tap the score box in the centre to add or remove frames for either side, or to Reset Score. The score is shown on any TV you cast to and on every device sharing the match.

Presets

Presets save your complete timing setup so you can switch between competitions in seconds.

Save a preset

  1. Set everything up in Settings, then tap Save Preset.
  2. Give it a Name, and optionally a Competition, Description and Region.
  3. Turn on Share with community (Public) if you’d like others in your league to be able to find it.

Load a preset

Tap Load Preset. Your own presets are under My Presets; presets shared by other referees and players are under Community, where you can search and filter by region.

The active preset

The loaded preset is shown at the top of Settings. If you change a setting it’s marked as Modified — tap Reset to go back to the preset’s values, Save as new to keep your changes as a new preset, or Clear to unload it.

Cast to TV

Cast the match clocks and scoreboard to a Chromecast or a Smart TV with Google Cast built in, so players and spectators can follow along. Alert sounds play through the TV too.

  1. Connect your phone or tablet to the same Wi-Fi network as the TV.
  2. Tap the Cast icon in the top bar (or side navigation on tablets).
  3. Choose your TV from the list. If it isn’t shown, tap Look for devices again.
  4. Run the match from your device as normal — the TV updates live.

To stop casting, tap the Cast icon again and choose Disconnect. You can connect or disconnect at any time without affecting the match.

Share a live match

Share a match with another referee, scorer or display device. All the settings and current clocks are transferred, and everything stays perfectly in sync.

Host a match

  1. On the main device, tap the Remote Match icon in the top bar.
  2. Tap Share Current Match. A QR code and Match ID appear.
  3. Show the QR code to the other device, or tap Copy Match ID and send it.

Join a match

  1. On the second device, tap the Remote Match icon, then Join Match.
  2. Use Scan QR to point your camera at the host’s QR code, or Enter ID to paste the Match ID.
  3. Tap Join Match. The clocks, score and settings appear straight away.

While connected

  • Mute Audio — silence alerts on a connected device so sound only plays on the main referee device.
  • Share Match (QR Code) — show the QR code again to add more devices.
  • Leave Match — disconnect this device; the match carries on for everyone else.
  • End Match — end the shared match for all devices.

Sharing uses the internet, so every device needs a data or Wi-Fi connection. The devices don’t need to be on the same network. Scanning a QR code needs camera permission.

Tips for referees

  • Press and hold the shot clock once the cue ball has been struck, then release when the balls stop to start the next shot’s countdown.
  • Place the device where both players can see it clearly, or cast the clocks to a TV for the whole venue.
  • Use a shared match so a second referee or scorer can follow — and mute audio on their device to avoid double alerts.
  • Save a preset for each competition you referee, so you never set up from scratch on match night.
  • Preview your warnings and beeps before the match so players know what to listen for.
  • Keep your volume up, and turn on Do Not Disturb so calls and notifications don’t interrupt a frame.
  • Keep your device on charge for long sessions — the screen stays on while the clocks are running.

FAQs

Can I use only the shot clock?

Yes. Turn the shot clock on and set the match and frame clocks to Off.

Can I run match or frame timing without a shot clock?

Yes. Switch the shot clock off and use the match and/or frame clocks on their own. You can use any combination of the three timers.

Can I customise the final-seconds beeps?

Yes. Choose how many seconds before time runs out the beeps should start, or set it to 0 for no beeps. You can do this separately for each clock.

Can the shot clock get shorter later in the match?

Yes. Turn on Match Shot Clock reduction (or Frame Shot Clock reduction) and set when it should kick in and the new shot time. For example, 30 seconds dropping to 15 seconds for the last 15 minutes.

Which TVs can I cast to?

Any Chromecast, Google TV or Smart TV with Google Cast built in. Your device and the TV must be on the same Wi-Fi network.

Can two devices run the same match?

Yes. Share the match from one device and join it from another by scanning the QR code or entering the Match ID. You can add more devices the same way.

Can I share my league’s settings with other referees?

Yes. Save your settings as a preset and turn on Share with community. Others can then find it in the Community tab when loading a preset.

Which cue sports does CueTime support?

CueTime works for any cue sport — UK 8-ball, Blackball, 9-ball, snooker, Chinese pool, billiards and more. Set the timers to match your rules.

Which languages are available?

CueTime is available in English and French, and follows your device language.

Do I need an account? Does the app track personal data?

No account is needed, and CueTime doesn’t collect personal information. See our privacy policy for details.

Troubleshooting

I can’t hear any sounds

Check your device volume and that silent mode is off. Bluetooth headphones or speakers may be taking the audio. If you’re in a shared match, check that audio isn’t muted on this device.

My TV doesn’t appear in the Cast list

Make sure your device and TV are on the same Wi-Fi network, the TV is switched on and supports Google Cast, then tap Look for devices again. Guest or venue Wi-Fi networks sometimes block casting between devices — try a different network if you can.

I can’t join a shared match

Check both devices are connected to the internet. If scanning doesn’t work, allow camera access in your device settings, or use Enter ID and paste the Match ID instead.

The first shot after the break isn’t using the longer time

The first-shot time needs the Frame clock set to Clock or Timer, and it applies at the start of each new frame. End the frame with the Frame ■ button so CueTime knows the next frame has started.

The screen dims or locks

CueTime keeps the screen on while the clocks are running. When the clocks are stopped, your normal screen timeout applies — increase it in your device settings if needed.

Support

Need a hand, got an idea, or found a bug?

We’d love to hear from you. And if CueTime helps your matches run smoother, a quick review really helps others find it.